Micro Rugged Board-to-Board

Samtec’s Edge Rate® contact system is designed for high speed, high cycle applications. The surface of the Edge Rate® contact is milled creating a smooth mating surface area instead of a stamped contact that mates on a cut edge. This smooth mating surface reduces the wear tracks on the contact increasing the durability and cycle life of the contact system. It also lowers insertion and withdrawal forces allowing the connectors to be zippered when unmating. 

• Edge Rate® contacts optimized for signal integrity performance
• 1.5 mm contact wipe
• Robust when "zippered" during unmating
• Up to 56 Gbps PAM4 performance
• 0.50 mm, 0.635 mm or 0.80 mm pitch systems
• Stack heights from 5 mm to 18 mm
• Extremely slim 2.5 mm body width on 0.635 mm pitch system
• 0.50 mm pitch system for up to 40% PCB space savings vs 0.80 mm pitch system

• Provides 0.50 mm (.0197") float in X and Y directions
• Ideal for multiple connectors on a board
• Up to 60 floating contacts
• Choice of body height and right-angle design

• Performance: Up to 8.5 GHz / 17 Gbps
• Increased insertion depth
• Dual stage hot pluggable
• Integral ground/power plane
• Shielded option available
• Power and RF ends options
• Contacts: Up to 208 I/Os
• Stack height: 10.00 mm - 16.00 m

• Performance: Up to 15 GHz / 30 Gbps
• Rugged Edge Rate® contacts
• Integral ground/power plane
• Up to 156 positions
• Slim footprint (less than 5.00 mm wide)

• 10 stack height options from 5 mm to 12 mm
• Audible click when mated
• Mating and unmating forces approximately 4-6x greater than typical micro pitch connectors
• Up to 100 contacts

Available in three pitches (0.80 mm, 1.27 mm and 2.00 mm), these micro rugged interconnects feature Samtec’s Tiger Eye™ contact system for high reliability and high cycle applications. The multi-finger, BeCu contacts provide redundant points of contact along with the best combination of mechanical and electrical properties. Increased design flexibility is achieved with the choice of surface mount or through-hole termination, as well as vertical or right angle orientations and ruggedizing features such as friction latching, weld tabs and locking clips.

• High reliability Tiger Eye™ three-finger BeCu contact system
• Optional locking and latching systems for higher withdrawal force
• Extended Life Product™ testing available
• Standard and cost-saving designs

mPOWER™ connector system is the ultimate micro, high-power solution with incredible design flexibility for power-only or power/signal applications. Due to the wide variety of stack heights available, mPOWER™ can be easily added to new or existing architectures alongside one of Samtec's high-speed connector systems for a unique two-piece power and signal/ground solution.

With up to 21 Amps per blade in an extremely small form factor, board space is saved without compromising power output.

• Power only or power/signal with Samtec's high-speed connectors
• Choice of 2, 3, 4 and 5 positions
• 5 – 12 mm stack heights
• Optional weld tabs
• Tin or 10 µ" Gold plated power blades; 30 µ" Gold plating available to meet specific regulations
• Standard creepage (1.65 mm) and clearance (2.20 mm); selectively loading contacts achieves customer specific requirements