Güç / Sinyal Sistemleri

• Current Rating: 2.7A per power pin
• High-speed Q2™ contacts with power end option
• Vertical and right-angle orientations
• Up to 8 power pins per end as an application specific option
• Optional shielding
• Stack Height: 10.00 mm and 11.00 mm
• Contacts: Up to 156 signals, up to 4 power per end

• Power blades rated up to 60 A per power bank
• Rugged Edge Rate® contact system
• Accepts 1.60mm (.062") thick cards
• Available with 40, 60 and 80 signal pins
• Choice of 2 or 4 power banks
• Optional weld tab for mechanical strength

• Performance up to 30 A per power blade
• Extremely low 7.50 mm profile (right-angle)
• Double stacked power blades for high-density
• Socket mates with standard .062" (1.60 mm) PCB card

• Performance up to 60 A per power blade
• Rugged 10 mm low profile design (right-angle orientation)
• 3 or 5 signal rows in the same form factor
• Available with 0 to 40 signal pins
• Up to 20 total DC power blades or 12 total AC power blades
• AC-DC power combos and split power options available
• Press-fit tails option for ease of board termination (ET60S only)
• Modules can be configured to accommodate most any design
• For coplanar or perpendicular applications
• Hot plug option available
• Dual sourced by Molex®

• Performance up to 31.4 A per power blade
• Up to 8 power blades and 80 signal pins
• High-power dual blade contact system
• Rugged screw down and locking clip options

mPOWER™ connector system is the ultimate micro, high-power solution with incredible design flexibility for power-only or power/signal applications. Due to the wide variety of stack heights available, mPOWER™ can be easily added to new or existing architectures alongside one of Samtec's high-speed connector systems for a unique two-piece power and signal/ground solution.

With up to 21 Amps per blade in an extremely small form factor, board space is saved without compromising power output.

• Power only or power/signal with Samtec's high-speed connectors
• Choice of 2, 3, 4 and 5 positions
• 5 – 12 mm stack heights
• Optional weld tabs
• Tin or 10 µ" Gold plated power blades; 30 µ" Gold plating available to meet specific regulations
• Standard creepage (1.65 mm) and clearance (2.20 mm); selectively loading contacts achieves customer specific requirements